Thermal fluids have several key properties that need to be carefully considered when selecting a fluid for a specific application. These properties include maximum temperature, freezing temperature, density, vapor pressure, specific heat, enthalpy, and viscosity. By performing calculations, one can save a significant amount of money that would otherwise be spent on trial and error experiments and extra equipment, which potentially can be avoided.
This assignment is a series of short analytical problems dealing with thermal fluid assessment. Some problems will require conceptual explanation and some will involved quantitative calculations.
Scenario:
There are two heat transfer fluids - oils that are similar in cost, quality, and expected lifetime. Here are their technical characteristics:
Oil A:
Tmax = 300°C
Tfreeze = -10°C
Cp = 1.7 kJ/kgK (specific heat)
ρ = 800 kg/m3 (density)
Oil B:
Tmax = 395°C
Tfreeze = 13°C
Cp = 2.3 kJ/kgK (specific heat)
ρ = 700 kg/m3 (density)
Range of reasonable Darcy Friction Factors:
0.01 > fd > 0.09 (for problem 3, use fd = 0.04)
Tin = 150°C
Tout = 280 oC
Answer the following questions:
List all your answers in the comparative table Oil A vs Oil B and include it in the end of your report.
The problems can be either typed (size 12 Times New Roman or equivalent font) or hand-written as scanned (like in previous lessons). Please submit your solutions in a single PDF file to Lesson 5 assignment dropbox in Canvas. Remember to show all key equations and analytical steps you take in your solution.